ALERT ACKNOWLEDGE

The ACK command may be used in different ways.

ACK[cr]

acknowledges the alert on the line selected. If there no selected line, then it is the
youngest alert - displayed at the bottom of the screen that is acknowledged. Pressing 
[F10] issues this form of the ACK command.

ACK name[cr]

acknowledges the alert you identify by the name of the alert variable. (e.g. ACK 
TCB1[cr])

ACK line[cr]

acknowledges the alert currently displayed at the line number you indicate. The 
argument 'line' is a constant from 4 to 21.

ACK @reg[cr]

acknowledges the alert currently displayed at the line number corresponding to the 
value of the RTES register 'reg'.

For example:SET ALARM 4[cr]

ACK @ALARM[cr]

acknowledges the alert displayed on line 4


Access Level:1